Indirect
 |
Heatrae Sadia Megaflo HE CL 210 Indirect Unvented Cylinder Innovative features now ensure the CL210L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 210L is constructed of Duplex stainless steel, with a white outer coating. 210 Litre capacity Height 1474mm Diameter 552mm Weight 43kg Heatrae Sadia part 95:050:369 |
£876.36 (£1,029.72 inc VAT) |
|
Heatrae Sadia Megaflo HE CL 170 Indirect Unvented Cylinder Innovative features now ensure the CL170L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 170L is constructed of Duplex stainless steel, with a white outer coating. 170 Litre capacity Height 1372mm Diameter 552mm Weight 39kg Heatrae Sadia part 95:050:367 |
£748.25 (£879.19 inc VAT) |
|
Heatrae Sadia Megaflo HE CL 250 Indirect Unvented Cylinder Innovative features now ensure the CL250L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 250L is constructed of Duplex stainless steel, with a white outer coating. 250 Litre capacity Height 1726mm Diameter 552mm Weight 50kg Heatrae Sadia part 95:050:372 |
£933.64 (£1,097.03 inc VAT) |
 |
Heatrae Sadia Megaflo HE Systemfit CL 210 Indirect Unvented Cylinder The Megaflo Systemfit CL 210 is a pre-plumbed factory assembled unit with pre-wired Danfoss controls, with pump and automatic by-pass valve. This makes for a speedy installation and reduces the risk of on-site defects. 210 Litre capacity Heatrae Sadia part 95:050:394 |
£1,312.88 (£1,542.63 inc VAT) |
|
Heatrae Sadia Megaflo HE CL 125 Indirect Unvented Cylinder Innovative features now ensure the CL125L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 125L is constructed of Duplex stainless steel, with a white outer coating. 125 Litre capacity Height 1090mm Diameter 552mm Weight 27kg Heatrae Sadia part 95:050:363 |
£623.56 (£732.68 inc VAT) |
|
Heatrae Sadia Megaflo HE Systemfit CL 300 Indirect Unvented Cylinder The Megaflo Systemfit CL 300 is a pre-plumbed factory assembled unit with pre-wired Danfoss controls, with pump and automatic by-pass valve. This makes for a speedy installation and reduces the risk of on-site defects. 300 Litre capacity Heatrae Sadia part 95:050:396 |
£1,473.75 (£1,731.66 inc VAT) |
 |
Oso 20 Series RI170 Indirect Unvented Cylinder Oso mains pressure unvented cylinders have for ten years have been at the forefront of quality and technology innovation. High performance from largest heating coils available, giving rapid re-heat times. Stainless Steel Cylinder with a casing of white epoxy coated steel. 170 Litre Capacity Height 1150mm Diameter 580mm 20 minute re-heat time Oso part RI170 |
£715.92 (£841.21 inc VAT) |
|
Heatrae Sadia Megaflo HE Systemfit CL 250 Indirect Unvented Cylinder The Megaflo Systemfit CL 250 is a pre-plumbed factory assembled unit with pre-wired Danfoss controls, with pump and automatic by-pass valve. This makes for a speedy installation and reduces the risk of on-site defects. 250 Litre capacity Heatrae Sadia part 95:050:395 |
£1,369.26 (£1,608.88 inc VAT) |
|
Heatrae Sadia Megaflo HE CL 145 Indirect Unvented Cylinder Innovative features now ensure the CL145L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 145L is constructed of Duplex stainless steel, with a white outer coating. 145 Litre capacity Height 1215mm Diameter 552mm Weight 36kg Heatrae Sadia part 95:050:365 |
£695.46 (£817.17 inc VAT) |
|
Heatrae Sadia Megaflo HE Systemfit CL 170 Indirect Unvented Cylinder The Megaflo Systemfit CL 170 is a pre-plumbed factory assembled unit with pre-wired Danfoss controls, with pump and automatic by-pass valve. This makes for a speedy installation and reduces the risk of on-site defects. 170 Litre capacity Heatrae Sadia part 95:050:393 |
£1,185.72 (£1,393.22 inc VAT) |
|
Oso 20 Series RI250 Indirect Unvented Cylinder Oso mains pressure unvented cylinders have for ten years have been at the forefront of quality and technology innovation. High performance from largest heating coils available, giving rapid re-heat times. Stainless Steel Cylinder with a casing of white epoxy coated steel. Height 1600mm Diameter 580mm 28 minute re-heat time Oso part RI250 |
£895.11 (£1,051.75 inc VAT) |
|
Oso RI125SL Slimline Indirect Unvented Cylinder Oso mains pressure unvented cylinders have for ten years have been at the forefront of quality and technology innovation. High performance from largest heating coils available, giving rapid re-heat times. Stainless Steel Cylinder with a casing of white epoxy coated steel. 125 Litre Capacity Height 1700mm Diameter 480mm 25 minute re-heat time Oso part RI125SL |
£792.49 (£931.18 inc VAT) |
|
Heatrae Sadia Megaflo HE CL 300 Indirect Unvented Cylinder Innovative features now ensure the CL300L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 300L is constructed of Duplex stainless steel, with a white outer coating. 300 Litre capacity Height 2040mm Diameter 552mm Weight 60kg Heatrae Sadia part 95:050:375 |
£1,038.14 (£1,219.81 inc VAT) |
|
Oso 20 Series RI125 Indirect Unvented Cylinder Oso mains pressure unvented cylinders have for ten years have been at the forefront of quality and technology innovation. High performance from largest heating coils available, giving rapid re-heat times. Stainless Steel Cylinder with a casing of white epoxy coated steel. 125 Litre Capacity Height 900mm Diameter 580mm 25 minute re-heat time Oso part RI125 |
£614.14 (£721.61 inc VAT) |
|
Oso 20 Series RI210 Indirect Unvented Cylinder Oso mains pressure unvented cylinders have for ten years have been at the forefront of quality and technology innovation. High performance from largest heating coils available, giving rapid re-heat times. Stainless Steel Cylinder with a casing of white epoxy coated steel. 210 Litre Capacity Height 1400mm Diameter 580mm 23 minute re-heat time Oso part RI210 |
£824.45 (£968.73 inc VAT) |
|
Heatrae Sadia Megaflo HE Systemfit CL 145 Indirect Unvented Cylinder The Megaflo Systemfit CL 145 is a pre-plumbed factory assembled unit with pre-wired Danfoss controls, with pump and automatic by-pass valve. This makes for a speedy installation and reduces the risk of on-site defects. 145 Litre capacity Heatrae Sadia part 95:050:384 |
£1,088.18 (£1,278.61 inc VAT) |
 |
Vaillant Unistor 125 Unvented Indirect Cylinder 125 litre stainless steel unvented cylinder which can be used with any boiler, but provides a total hot water and heating system when installed with the Vaillant ecoTEC plus system boiler. Can be used with underfloor heating systems |
£634.84 (£745.94 inc VAT) |
|
Vaillant Unistor 180 Unvented Indirect Cylinder 180 litre stainless steel unvented cylinder which can be used with any boiler, but provides a total hot water and heating system when installed with the Vaillant ecoTEC plus system boiler. Can be used with underfloor heating systems |
£749.03 (£880.11 inc VAT) |
 |
Oso Super S Indirect Unvented Water Heater SCI210 All pipes, expansion vessels and electric cables are hidden from view giving the neatest possible installation. Reduced heat losses from the Super S are achieved by the use of 100% recyclable Super Eco foam insulation and also incorporating all valves and pipes beneath the insulated removable top. 210 Litre capacity Height 1300mm Diameter 570mm Oso part SCI210 |
£816.88 (£959.83 inc VAT) |
|
Heatrae Sadia Megaflo HE CL 70 Indirect Unvented Cylinder Innovative features now ensure the CL70L gives superior levels of efficiency to provide even more hot water as it is needed. The CL 70L is constructed of Duplex stainless steel, with a white outer coating. 70 Litre capacity Height 784mm Diameter 552mm Weight 25kg Heatrae Sadia part 95:050:361 |
£546.04 (£641.60 inc VAT) |
|
Heatrae Sadia Megaflo HE Systemfit CL 125 Indirect Unvented Cylinder The Megaflo Systemfit CL 125 is a pre-plumbed factory assembled unit with pre-wired Danfoss controls, with pump and automatic by-pass valve. This makes for a speedy installation and reduces the risk of on-site defects. 125 Litre capacity Heatrae Sadia part 95:050:382 |
£1,016.24 (£1,194.08 inc VAT) |
|
Vaillant Unistor 155 Unvented Indirect Cylinder 155 litre stainless steel unvented cylinder which can be used with any boiler, but provides a total hot water and heating system when installed with the Vaillant ecoTEC plus system boiler. Can be used with underfloor heating systems |
£690.97 (£811.89 inc VAT) |
|
Vaillant Unistor 210 Unvented Indirect Cylinder 210 litre stainless steel unvented cylinder which can be used with any boiler, but provides a total hot water and heating system when installed with the Vaillant ecoTEC plus system boiler. Can be used with underfloor heating systems |
£865.16 (£1,016.56 inc VAT) |
|
Vaillant Unistor 260 Unvented Indirect Cylinder 260 litre stainless steel unvented cylinder which can be used with any boiler, but provides a total hot water and heating system when installed with the Vaillant ecoTEC plus system boiler. Can be used with underfloor heating systems |
£922.26 (£1,083.66 inc VAT) |
|
Vaillant Unistor 310 Unvented Indirect Cylinder 310 litre stainless steel unvented cylinder which can be used with any boiler, but provides a total hot water and heating system when installed with the Vaillant ecoTEC plus system boiler. Can be used with underfloor heating systems |
£979.35 (£1,150.74 inc VAT) |
|
Oso 20 Series RI330 Indirect Unvented Cylinder Oso mains pressure unvented cylinders have for ten years have been at the forefront of quality and technology innovation. High performance from largest heating coils available, giving rapid re-heat times. Stainless Steel Cylinder with a casing of white epoxy coated steel. 330 Litre Capacity Height 2090mm Diameter 580mm 36 minute re-heat time Oso part RI330 |
£1,065.06 (£1,251.45 inc VAT) |
|
Oso Super S Indirect Unvented Water Heater SCI120 All pipes, expansion vessels and electric cables are hidden from view giving the neatest possible installation. Reduced heat losses from the Super S are achieved by the use of 100% recyclable Super Eco foam insulation and also incorporating all valves and pipes beneath the insulated removable top. 113 Litre capacity Height 870mm Diameter 570mm Oso part SCI120 |
£588.05 (£690.96 inc VAT) |
|
Oso Super S Indirect Unvented Water Heater SCI150 All pipes, expansion vessels and electric cables are hidden from view giving the neatest possible installation. Reduced heat losses from the Super S are achieved by the use of 100% recyclable Super Eco foam insulation and also incorporating all valves and pipes beneath the insulated removable top. 150 Litre capacity Height 1050mm Diameter 570mm Oso part SCI150 |
£611.61 (£718.64 inc VAT) |
|
Oso Super S Indirect Unvented Water Heater SCI180 All pipes, expansion vessels and electric cables are hidden from view giving the neatest possible installation. Reduced heat losses from the Super S are achieved by the use of 100% recyclable Super Eco foam insulation and also incorporating all valves and pipes beneath the insulated removable top. 170 Litre capacity Height 1160mm Diameter 570mm Oso part SCI180 |
£705.83 (£829.35 inc VAT) |
|
Oso Super S Indirect Unvented Water Heater SCI250 All pipes, expansion vessels and electric cables are hidden from view giving the neatest possible installation. Reduced heat losses from the Super S are achieved by the use of 100% recyclable Super Eco foam insulation and also incorporating all valves and pipes beneath the insulated removable top. 250 Litre capacity Height 1550mm Diameter 570mm Oso part SCI250 |
£886.70 (£1,041.87 inc VAT) |
|
Oso Super S Indirect Unvented Water Heater SCI300 All pipes, expansion vessels and electric cables are hidden from view giving the neatest possible installation. Reduced heat losses from the Super S are achieved by the use of 100% recyclable Super Eco foam insulation and also incorporating all valves and pipes beneath the insulated removable top. 295 Litre capacity Height 1750mm Diameter 570mm Oso part SCI300 |
£929.60 (£1,092.28 inc VAT) |
Boiler Scrappage Scheme
In December 2009 the Chancellor, Alistair Darling, announced plans for a Boiler Scrappage Scheme, allocating cash to allow those with the most inefficient of boilers to get financial support when upgrading to a more modern unit.
Initial news suggests that from April 2010 the Boiler Scrappage Scheme would give some 125,000 households the right to claim up to £400 towards the purchase and installation of a new, high-efficiency boiler. In a typical 3 bedroom house the estimated fuel saving could be as high as £250 per year.
Currently the Boiler Scrappage Scheme is only for "G-rated" (on the SEDBUK scale) boilers, and is only available for homes in England and Wales, although there is call for this scheme to be made available in Scotland too. For more information about the scheme and your eligibility, aswell as signing up for our email updates visit our page dedication to Boiler Scrappage Scheme news.
